Flat Roof Construction – The Various Techniques You Can Choose From

Okay, you have decided to play your part in reducing the carbon footprint and preventing global warming. You have chosen to have a large solar panel constructed on your roof so you can make use of solar energy for various lighting and heating purposes. This would not be possible if your house has a sloping roof. Opting for a flat roof construction has a number of benefits, one of which is that it helps you set up a solar panel to harness the natural source of energy.

There are a number of techniques that you can choose from. Let us take a quick look at three of the most preferred techniques which are being used by various people all over the world.

Membrane Roofing

If you are looking for long lasting roofs that are water resistant as well, then membrane roofs is the best choice. This flat roof construction is put up using multiple polyvinyl chloride sheets. The thickness of each sheet used in this construction varied from 30mm to 60mm. You need not install a separate moisture resistant barrier on the roof prior to installing membrane roofing. You can place these membranes directly on the roof along with insulation that can offer thermal resistance. Once the membranes are installed, they are bonded together. You can either use a special sealer that helps the sheets chemically bond with each other or you can heat the seams so they melt into each other, thus holding them in place.

Built up Roofing

Built up roofing is the oldest roofing technique which is the most preferred technique in the United States. Moisture barriers are installed over the roof prior to proceeding with built up roofing. Alternating layers of waterproofing elements and bitumen are installed over the moisture barrier. It is the number of layers that determines the quality of the roofing. More the number of layers, better is the quality of the roofing.

Spray Foam Roofs

This is the flat construction roofing that uses foam made of polyurethane in order to provide a protective covering to the roof. Rigid sheets of foam insulation are fastened to the roof. The next step of this technique is to mix a foam solution and apply it to the roof with the help of a spray gun. In order to facilitate proper drainage, the thickness of the spray foam roof varies across the entire surface. An elastomeric coating helps hold the spray foam roof firmly in place. It also helps prevent fire accidents and provide water resistance.

Luxury Car Conversions: What The Whole Fuss Is

Having a personal car has been the matter of the status from the years and is expected to continue for many more years to come. The status of a person increases more in the society as soon as he drives a new car at his doorstep, and if the car is luxurious then undoubtedly the eyes of his neighbors stare at his place. This is mainly because the price tag of which the luxury cars are priced in international market. But having a luxury car is not the bag of everyone’s shoulder and therefore lots of the car lovers across the world have to sacrifice their desire of driving a luxurious car throughout their life and have to compromise the affordable car according to their budget for drive.

But, now all this is going to be the tale of yester years as now there are various options by which these cars owners can convert their existing car into a brand new luxurious car of their choice. Recognized as luxury car conversions this trend in recent years has flourished at jet dynamic speed across the world facilitating the regular car customize their car with the features that are offered in any of the luxurious cars being sold across the world. As the general practice is refers to the third-party customization which are not offered by the original manufacturer of that vehicle but customized on the demand of the car owners according to his requirement. In simple words, it may defined as the process where in the noticeable features of some standard car are converted in resemblance to some luxurious car.

An interesting feature of getting the car conversions is that along with integration of luxurious specifications it also helps in enhancing the comfort seating experience of the persons travelling in it. The conversion also impacts the functionality of machinery installed inside the bonnet and helps in offering superior performance of the car similar as offered by its original version. It would be interested to know that till few years this type of conversion was considered as an expensive investment pulling the car owners towards additional financial burden. But interestingly with entrance of different suppliers of the part of car conversions now days different types of kits are available in market which facilitate the car owners to convert their in accordance to their preference at their own end.

The commonly preferred cars that are converted into luxurious cars are Jaguar, Land Rover, Aston Martin, Ferrari, Lamborghini, Bentley, and The Vault.

An interesting feature of getting the car conversion is that the countries where the car enthusiasts get their converted into new avatar is that this conversion is strictly done according to the norms applicable in that country. For instance in the country where cars with left hand drive are preferred then in such country the conversion will be applied only with left hand drive to comply strictly according to its transportation law. Similarly in the countries where there is condition of political and social unrest the cars will be equipped with all saving standards that will protect the passengers from any type of bullet attack.

One more thing which needs to be specified about car conversions is that along with integration of luxurious features appropriate attention is paid towards the overall outlook of the car whether it is on its exterior or interior. This includes placement of lighting, plastic cladding, roof rails etc on the exterior front.

The Dangerous 10 – Top 10 Worst Food Additives

Food additives are substances added during the processing or making of a certain food in order to preserve flavors and freshness and enhance taste and appearance.

Although some of them have been used for centuries, the use of certain food additives is becoming really widespread and some of them are extremely dangerous for your health, I would say toxic even.

I’m not talking about the once-in-a-while consumption of a certain processed food containing additives, which can’t harm anyone. I am talking about daily use. Statistics show that the average American spends about 90% of his/her budget on this kind of food; which means that if you open an American fridge or look up on the shelves you’ll find tons of canned, dehydrated, artificial or processed stuff, which is extremely unhealthy, and its persistent consumption can cause health problems.

Typically these food ingredients are very difficult to identify, both for the variety of names and codes they’re labelled with and the very minuscule fonts used to lists them on the ingredient list.

Here is the list of the top 10 toxic ingredients.

Go get your detective glass and start reading labels!

1) HFCS – High Fructose Corn Syrup

High Fructose Corn Syrup (HFCS) is a highly-refined artificial sweetener made from corn starch and found in almost all processed food such as: bread and baked goods, salad dressing, candies, yogurt, soda etc. And according to some studies has become the number one source of calories in the US.

Indeed, its easy handling and cheap cost made it the number one granulated sugar replacement: The amount of refined sugar we consume has declined over the past 40 years, while we’re consuming almost 20 times as much HFCS.

HFCS is linked with weight gaining, it increases your LDL (“bad” cholesterol) levels, and contributes to the development of diabetes and tissue damage, among other harmful effects.

Also, recent researches published by the American Association for Cancer Research found that the fructose in HFCS promotes cancer growth, specifically pancreatic cancer.

2) Sodium Nitrate & Sodium Nitrite (NaNO3- NaNO2)

Both of them are chemical compound used as a food additive to preserve and give to cured meats, smoked fish and poultry a nice red pinkish color. Although their purpose seems harmless, these ingredients are highly carcinogen and their consume is linked with gastrointestinal cancer and heart diseases.

In fact, under certain conditions, they can form nitrosamines compounds, molecules that cause cancer in animals and humans.

Also, in massive doses, nitrite – and nitrate, which under some conditions changes to nitrite – can lead to a condition called methemoglobinemia. In our body, nitrites, indeed, have the ability to change the structure of the hemoglobin into methemoglobin: the binding of oxygen to whom results in an increased affinity for oxygen in the remaining heme sites. This leads to an overall reduced ability of the red blood cell to release oxygen to tissue and it may occur in tissue hypoxia.

Can’t give up on eating salami, bacon or ham? Choose the uncured ones.

Sodium Nitrate is listed under its INS number 251 or E number E251, Sodium Nitrite has the E number E250.

3) MSG – Monosodium Glutammate

Monosodium glutamate (MSG) is a flavor enhancer commonly added to Chinese food, canned vegetables, soups and processed meats. While the Glutamic acid is naturally present in our bodies, and in many foods, such as tomatoes and cheese, the ones exploited by the processed-foods industry is chemically produced through hydrolysis of vegetable proteins with hydrochloric acid to disrupt peptide bonds or by the fermentation of starch, sugar beets, sugar cane or molasses.

The substance produced has the ability to excite our taste buds and make everything taste delicious, which wouldn’t be a big deal if it hasn’t been shown that high levels of MSG can seriously screw with brain chemistry causing damage to areas of the brain unprotected by the blood-brain barrier.

4) Artificial Colors

Food dyes are one of the most common ingredients in processed food used with the purpose to make your meals or drinks more desirable and appealing.

Nothing against that if they wouldn’t have been linked to some serious health problems.

Blue #1 and Blue #2 (E133)

Banned in Norway, Finland, and France. May cause chromosomal damage.

Found in candy, cereal, soft drinks, sports drinks and pet foods.

Red dye #3 (also Red #40 – a more current dye) (E124)

Banned in 1990 after 8 years of debate from use in many foods and cosmetics. This dye continues to be on the market until supplies run out! Has been proven to cause thyroid cancer and chromosomal damage in laboratory animals, may also interfere with brain-nerve transmission.

Found in fruit cocktail, maraschino cherries, cherry pie mix, ice cream, candy, bakery products and more!

Yellow #6 (E110) and Yellow Tartrazine (E102)

Banned in Norway and Sweden. Increases the number of kidney and adrenal gland tumors in laboratory animals, may cause chromosomal damage.

Found in American cheese, macaroni and cheese, candy and carbonated beverages, lemonade and more! (source Food Matters website)

The slogan “Eat the Rainbow” is still cool but go natural, please!

5) BHA & BHT

BHA (butylated hydroxyanisole), also listed with the label of E320, and BHT (butylated hydroxytoluene) are two organic compound widely used by the food industry as preservatives due to their antioxidants proprieties as they can prevent rancidification of food containing fats.

Although declared safe from FDA, The U.S. National Institutes of Health reported that they may form cancer – cause reactive compounds in our body potentially leading to cancer.

Also, they can disturb your hormone and neurological system.

BHA is in tons of food: pick up a bag of chips, a box of cereal, a package of frozen sausages or simply eat a gum, and you have a high probability to find BHA and or BHT (or even worse, both of them) in the ingredients list.

6) Artificial Sweeteners

Artificial Sweeteners are sugar substitute used to give some sweet taste to drinks of food without all the calories of sucrose.

Aspartame, known also as NutraSweet, Equal and codified ad E951, is the most famous one. It is 200 times sweeter than sugar, but its effect on the human body is not as sweet as it tastes: is a neurotoxin and carcinogen.

Some studies claim that is the most dangerous substance on the market, with a wide range of health effects ranging from mild problem such as memory issues, headache and dizziness, to more serious ones, such as multiple sclerosis, diabetes, Parkinson’s, Alzheimer’s, fibromyalgia, and emotional disorders.

Avoid Acetisulfame K, Saccharin (Sweet’N Low, SugarTwin), and Sucralose (Splenda) too.

7) Sulfur Dioxide

Sulfur Dioxide is a chemical compound with antimicrobial and antioxidants proprieties, used as a preservative for dried fruits such as dried apricot, raisins and prunes and added to fruit juices, cereal bars, breakfast cereal to prevent discoloration, ripening, and rotting.

Checking food labels for it, and for sulfites in general, with numbers in the range E220-228, is helpful; however, companies are required to list it only if there are more than 10 parts per million (ppm) in the finished product.

Whilst harmless to healthy persons when used in recommended concentrations, it can induce asthma and respiratory problem when ingested by sensitive subjects, even in high dilution.

It also destroys vitamins B1 and E.

8) Trans Fats

“Trans fats, or trans-unsaturated fatty acids, trans fatty acids, are a type of unsaturated fat that occur in small amounts in nature, but became widely produced industrially from vegetable fats for use in margarine, snack food, packaged baked goods and frying fast food starting in the 1950s. Trans fat has been shown to consistently be associated, in an intake-dependent way, with increased risk of coronary artery disease, a leading cause of death in Western nations.”

As matter of facts, Trans fats have the power to increase LDL (bad cholesterol) levels, while decreasing the amount of HDL (the good one) in our bodies. Trans fat is abundant in fast food restaurants. Here is a list of health issues linked to a high consume of trans fats: Alzheimer’s disease, coronary artery disease, cancer, diabetes, obesity, liver dysfunctions, infertility, depression, deficit in memory.

Keep them in mind while you’re enjoying your fries!

9) Sodium Benzoate

Sodium Benzoate is the sodium salt of benzoic acid and it’s famous for the anti-fungal proprieties.

Pick up a soda can and you’ll surely find it as an ingredient (E211). Indeed, it is heavily used by the soft drink industry, and not only in that. This chemical compound it is primarily added to acidic foods such as prickles, sauces, vinegars in order to enhance their flavor.

When mixed with ascorbic acid (well known as Vitamin C), Sodium Benzoate create an unfortunate side effect: it forms benzene known as a potent carcinogen, which contribute to the formation of many different types of cancer.

10) Potassium Bromate

Last but not least, Potassium Bromate, used in the Unites States, as a flours additive to improve elasticity and strength of the dough and allow it to rise higher.

In 1999, the International Agency on Research for Cancer declared that potassium bromate was a possible human carcinogen. Since that, it has been banned in a number of country including Europe and Canada, but not in the United Stated, where studies have found it in more that 86 baked goods found on supermarket shells.

Jewelry In Ancient Rome

Jewelry is a fascinating fashion accessory that has been popular from ancient times. It has played a variety of roles including political, religious and ornamental, and jewelry artifacts have helped modern historians shape pictures of the daily lives of ancient civilizations.

Jewelry in ancient Rome is no exception. There are literary accounts and pictorial depiction such as in the Regina tombstone, plus an abundance of other artifacts available that help us to understand the role jewelry played during this fascinating time.

Jewelry was worn by men and women though it was subject to conventions of the time; particularly with regards to the appearance of men. Male jewelry was typically practical in nature. Men usually wore a single ring. The ring would serve a functional purpose. Typically a signet ring, the male jewelry item was used to seal official documentation. The male signet ring was initially iron but was later produced in gold as it displayed status and wealth more clearly.

Other practical uses of the signet ring included the inlay being a type of key for a strong box. Literary evidence suggests that propriety regarding male jewelry was ignored by a minority of fashion fanatics, as with any other social group. Trends and attitudes also changed from the time of Emperor Augustus. The emperors were established with official state clothing during his reign which included jewelry as a display of status and power.

Jewelry also had a protective function in ancient Rome. Boys wore an item of jewelry known as a bullah. This was worn from being a baby. It was worn around the neck and was a form of chain with a pouch which contained an amulet. This was a jewelry item worn by most classes, but the rich upper class had bullahs made of gold. The amulet was often phallic in design, as boys were considered to be the stronger species and so needed protection. Another jewelry item worn by boys was a small gold ring which was again carved with a phallus for good luck

With regards to women, jewelry was first and foremost a display of wealth and status. Women had no obvious status distinction through their dress like Roman men. Therefore, hairstyles and jewelry were the only distinction possible. The importance of jewelry to the status of women is apparent through certain historical events. When the Oppian law was passed in 195BC curbing the use of jewelry and suggesting it be handed over for war materials, women demonstrated against this in the streets. During the campaigns of Marcus Curellius, women chose to donate their jewelry to get enough gold to send a huge gold vase as an offering to Delphi. Their behavior was rewarded with speeches at funerals which had previously been only for men.

The type and amount of jewelry worn by women varied, but the richest women were the most flamboyant in terms of amount and style. Amber jewelry was only worn by lower class women and was thought vulgar by the wealthy who favored gold jewelry. Other items used to make jewelry include pearls, colored glass beads and polished stones. These would be inset in gold and would vary in size and style, depending upon status. It was possible to tell a lot about a woman in ancient Rome by the jewelry she wore.

The types of jewelry worn include necklaces with adornments such as pendants, amulets. Fibula which are similar to safety pins were used as fasteners and so were often adorned to make them a piece of jewelry that was both function and beautiful. Earrings were popular and came in both hoop and drop styles. Rings were usually inset with stones or carvings.

Particularly popular jewelry items were engraved gems which were referred to as intaglio. These were gems such as carnelian, jasper and chalcedony that had a sunken or engraved image, created with the use of wheels and drills.

Tomb jewelry findings suggest that bracelets were usually worn in pairs with one on each arm. Some tombs have revealed up to 7 items of jewelry on each arm which shows how the conventions for men and women differed. Even gold thread hairnets have been discovered.

This article is under GNU FDL license and can be distributed without any previous authorization from the author. However the author’s name and all the URLs (links) mentioned in the article and biography must be kept.

Be A Proud Mustang Car Owner With A Stormproof Car Cover

To keep a Mustang stored outdoors uncovered, is to belittle it. Yes every passer-by will be able to see that you are the owner of a Mustang, but after a while, that Mustang won’t look so great. In fact, people will wonder why on earth it is not covered!

Covering any car is a must, how much more so a fabulous Mustang. You just do not need that exposure to nature’s detriments, and all the problems that come along with it. So instead, dig a bit in your pocket, not too deep, and get a Stormproof car cover.

A Stormproof is exactly what it says to be; totally stormproof. It is naturally resistant to all weather conditions. To the rain, the sleet and snow, the sun and wind, and everything else that goes in between. Woven is a way that is unique to Stormproof, the fabric provides resistance that is natural. This makes the cover extraordinarily durable, as the resistance will not wear thin with time and use, as is the case with many other types of covers that are treated.

The material of the Stormproof cover is breathable. This means that air and moisture are allowed to pass out through the fabric and away from the car. This prevents the car from steaming up and getting mouldy or rotten whilst covered. Simultaneously though, air and moisture are denied access in through the material, ensuring that it is totally waterproof.

When your Mustang is covered with Stormproof, you do not have to worry about the paintwork peeling from the acid rain, or it getting bleached from the sun. The exterior of your Mustang will be able to remain shiny, wholesome, and vibrant in color. You wont even have to be concerned about bird droppings, tree sap and dust. All of these are obviously prevented from landing on the exterior and making your precious vehicle look a sight and a half.

Usually, cars are at risk of getting knocked about and scratched. This can happen from things flying about in the wind, or from passer-bys. Thankfully, the Stormproof cover is able to combat this. Whilst it may not be able to prevent them from occurring, it can prevent them from leaving an impression on the Mustang, as it absorbs the shock of the impact.

All Stormproof covers are custom made. They are tailor made for each and every individual car with it’s owner specifications in mind. You will be able to select the color and design of the cover. You even have the option of personalising the cover even more, by placing a logo of your choice on the bonnet.

Having a custom cover, maximises the protection that Stormproof offers as there is no space for leakages, or things to sneak in. At the same time, the perfect fit gives a very sleek, upper class impression, one that is really befitting a Mustang!

Cutting Costs Without Reducing Your Team

One of the things that many businesses around the world are notorious for is layoffs of their workers when they have to cut costs. It appears as though the least required asset for these companies is their workers. As brutal as it may sound, many businesses reduce their team sizes to reduce their costs every day. It is quite surprising because there are in fact dozens of different ways for businesses, especially small ones, to cut their costs without sending their employees home. Not to mention, small businesses aren’t in the best position to terminate their employees when they are already struggling with growth and expansion.

Let us first look at the circumstances and reasons why small businesses resort to firing their employees and terminating their contracts.

Reasons Why Businesses Terminate Their Employees

Your Employee’s Performance is below Requirements

The biggest and probably the most valid reason for firing an employee is when they are not able to perform according to the set targets. Despite this being a valid reason, you should always follow the complete procedure and let go of your employee most ethically and professionally possible. Tell them that they also have the right to quit a company when a company does not pay them as promised and vice versa.

Your Employee Isn’t Honest

You have noticed that your employee is not honest. They try to spend time doing nothing behind your back and are interested in things that they should not be concerned with. It is a risk to have such a worker working at the company.

Your Employee Is Having a Hard Time Assimilating

One of the reasons why many employees are not able to give their best is because they can’t fit in the culture of your workplace. It’s either their religious, personal or moral beliefs that don’t let them feel being a part of the team.

Your Employee Doesn’t Care

Believe it or not, some employees don’t care about the rules and regulations of your workplace and being at a professional place. They bully people around them, try to act pretentious, are not punctual and do not pay any attention to the dress code policy.

Your Employees Cost You Too Much

This is quite an oxymoronic situation where the people who bring you business are the ones costing you money. Sometimes, companies become financially weak, and the only way they have to reduce their costs is firing employees. This helps them save money on employee compensation, bonuses, and incentives.

Is Employee Termination the Only Way to Cut Costs?

Not at all! There are many other ways for companies to reduce their costs without letting go of their employees. Here are some.

Negotiations with Vendors and Suppliers

You can look into your current list of suppliers and vendors and look for opportunities to reduce costs. You have to realize that there are group purchasing organizations developed specifically for this purpose. Furthermore, there are online search engines designed specifically for businesses where you can find other businesses that can help you reduce your costs.

Buy in Bulk

One simple way to reduce your costs is to purchase in bulk. Whether you are buying products or subscribing to software or online platform services, bulk purchases will always help you reduce your costs. As a business, you are subscribed to dozens of different online services and buy various items on a monthly or weekly basis. Buy them for several months or a complete year to save your costs.

Reduce Lavish Expenses for Now

It is amazing that businesses offer their employees with refreshments, coffee, and teas for free, but there is a time when you can do this with ease. Until and unless you have reached a point where affording such luxuries do not bother you at all, do not introduce them.

Invest in the Right Technology

Whether you are buying an electric generator for your office, bulbs and lights, ceiling fans, air conditioning units or machinery, you must invest in latest and energy-efficient technology.

Market Wisely

Marketing can suck a lot of your capital out of business depending on the type of marketing you are doing. However, it will be rewarding for you if you use analytical data to narrow down only the marketing campaigns that are lucrative for your business. Spend on them and keep away from spending on marketing efforts that have not yielded any good results.

Similarly, you can find many other ways to reduce your costs without sending your employees home.

Risks Associated with Firing Your Employees

While firing your employees should be the last thing on your list of methods to cut costs, you must also know the many risks that come with employee termination. Here are a few.

Sharing of Company Secrets with Competitors

When employees are not happy with your decision of firing them, they may not care about what action you can take against them. They may go for interviews with your competitors and share your trade secrets. This can be a big set-back for you if your competitor decides to take advantage of the situation.

Lawsuits

When employees believe they have been fired based on unreasonable grounds, they may try to take you to court. If any wrongful termination is proved, it can be expensive for your company. Always be sure to complete the procedure of termination or make sure the termination is justified.

Attack on Brand Image through Social Media

Today, people have a voice, and some people are ready to listen to their voice. Social networking platforms are great places for employees to discredit your brand and slander your image if they believe they were terminated by you wrongfully.

Bad Performance of Existing Employees

It does not matter how much you care about your employees. They may have a stronger connection among themselves than they have with you. Therefore, when you terminate an employee and cause some dissention among the ranks.

So, it is highly recommended that you consider the many other ways of cutting costs for your small business before choosing to terminate your employees.

Helpful Home & Furniture Planning Tips

Home furniture designing is usually a very worthwhile project. In order to make the most of this redesign adventure you may need to get organized. In the event that the concept of becoming more organized is drudgery to you, be assured it will not take away from your ingenuity. Instead, becoming more organized will contribute to your ability to come up with very unique ideas.

While preparing to make very significant design decisions (choosing home & furniture re-decoration themes and furniture items) it is advised that you follow certain methods of interior design theme planning. These effective tips will assist through the entire process:

    • Determine regarding your budget and preferences. This will always be your main priority no matter how huge or modest of a home & furniture redecoration project pursued. This planning phase will in part determine whether or not you will choose original pieces or high-quality re-creations. This redecoration stage will also determine how much of your home you will plan to redesign now. Taking time to plan this step will also help you prioritize will help you immensely.
    • Assess decorating space. This will help you allow the proper sizes and shapes of pieces you select. This is one action you might take while you begin shopping for new home & furniture pieces.
    • Research before you buy. After you have figured out how you would like a certain room or home decorated this is the time to shop around. Obviously, you could accumulate a collection of clever ideas during this phase to assist you complete or expand on the ideas that you thought of when you first decided to redecorate. While you take time to shop, you might also alter your original plans as you will be offered the chance to implement many possibilities.
    • Make decisions regarding your desired decorating scheme. The theme you choose will most likely be developed while you carry on with each step of the redecoration planning process. For instance, as you pursue your redecoration plans, thoughts regarding colors might be different than in the beginning when it is time you reach this phase. As you make it through each of these redecoration steps, finding out what is available to you currently might also influence you.
  • Make each room design as personal and as unique as you are able. Of course this step of the redecoration process does require some amount of flexibility on your part. Nevertheless, in the end it is essential that you are happy with all aspects of design, including themes and colors you have selected. If you are unable to find a particular piece that you would prefer to add to your redecoration design, perhaps it can be special ordered for a small additional fee. If you can afford to do so, this is something to consider.

Fashion Style – Granny Chic to Look Young

After the vintage style and oldies taken over the trend and catwalks of the world, looks like an old woman style is ready to look young again. Several years ago, if someone is wearing a 70s dress, people will surely look with weird stare and called it ‘ancient’. However, once catwalks bring back this style. The word ‘ancient’ was turned into ‘vintage’ and the whole world affected by this trend.

Dress small floral knee-length, with belts and sunglasses are the same width back to be a trend. Even those who have quite fashionable mother can smile because of the clothes, and accessories appear to be their mother’s vintage. This time, the world’s hottest catwalks present various granny-chic styles as a trend for autumn and winter 2010.

What is distinctive of a grandmother? Glasses, it helps the already blurred vision. You will need oldies-style glasses to look like grandma; one with width and thick-rimmed, black or brown. Furthermore, you will need a tote bag. Tote bag with floral or other vintage motif and soft colors, not too flashy style, is well suited to accompany your style. Choose a tote bag which has a simple model and still the typical old style. The more modern design would eliminate the impression of granny chic.

It’s time to play with the skirt that is suitable for this style. You can choose a classic pencil skirt or A-line skirt with natural colors. All these high-waist skirt are seldom subordinate to the elderly who designed hipster. Complete with beautiful small belt to give the chic impression. Like the skirt, select a blouse with soft colors, simple design and high cut collar. Say good bye to the deep V-neck collar and piece of other modifications. You can choose the accented modern blouse in the arm.

Finally, choose accessories that are not too big, just small to medium sized; simple but beautiful enough to be admired! Avoid contemporary and modern design, of course. Remember, a grandmother usually does not use an excessive amount of accessories. A pair of earrings, one to two rings, necklaces and bracelets and a watch is enough. You can be stylish with granny chic if you are creative in mix and match.

Food Specialities Of Different States Of India That Everyone Must Have

The variety of food India has to offer is simply unbelievable. Every state of it has an array of food and different cooking style. From the spiciest to the most ordinary preparations, they have something different to offer. To know more, we bring to you some authentic, must have, local dishes native to the various Indian states.

DAAB CHINGRI- West Bengal
Filled with green coconut, it is a traditional Bengali dish of soupy mustard prawn curry. The aroma of the coconut water and kernel gets mixed up with the prawn, giving it a most fabulous taste. This special delicacy is best served with a plate of boiled rice.

BAL MITHAI- Uttarakhand
This exquisite dish comes from the state of Uttarakhand which is made by roasting the evaporated milk cream with cane sugar and later coated with white sugar balls. It is one of a true delight for all the dessert lover.

KAMBU KOOZH- Tamil Nadu
It is cool refreshing and healthy dish from the state of Tamil Nadu. The dish is prepared from millet and is stored in the earthen pots to create a perfect taste.

MALAAI GHEWAR- Rajasthan
This round shaped food delicacy is a traditional dish of Rajasthan. It is made from flour, milk and pure ghee. There is a possibility that you might find it in the other parts of India also, but the one you get in Rajasthan is simply incomparable.

CHHENA PODA- Odisha
This is an Oriya desert prepared from the baked ricotta cheese. This sweet delight could also be taken as an Indian version of Cheesecake. Do explore when you plan your visit to the state.

THALIPEETH- Maharashtra
It could be taken as the multigrain pancake, prepared from roasted chana daal, wheat, sorghum, millet, rice and mildly spiced with coriander seeds, onion fresh coriander and cumin seeds. The delicacy is very nutritious and is best served with buffalo milk cream.

BHUTTE KA KEES- Madhya Pradesh
It is a dish made with spicy grated sweet corn. The tangy taste of this authentic delicacy is must to try when you plan to visit the state.

IRACHI ISHTU- Kerala
This is a traditional food item from Kerala which is made with Chicken, beef or lamb. This tasty stew is best served with appam or plain bread.

RUGDA- Jharkhand
When you planning to visit Jharkhand, do not forget to try Rugda. It is a variety of mushroom indigenous to the forests of Jharkhand. The dish is very healthy and is best eaten with rice or poori.

KALAADI CHEESE- Jammu and Kashmir
Prepared from cow’s milk, Kalaadi is a traditional local hill cheese which comes from the state of Jammu and Kashmir. You simply cannot forget to miss out on its divine taste when you are there.

MADRA- Himachal Pradesh
Coming from the state of Himachal Pradesh, Madra is a traditional pahadi gravy. The dish is prepared with yoghurt, coconut, almonds, peas and raisins. This special food item offers a very aromatic flavour and delicious taste.

BAJRA KHICHDI- Haryana
This amazing khichdi is made with coarsely crushed pearl millet and is served with pure ghee or sesame oil. The dish becomes all the more tasty with lassi, pickles, papad, gur or curd.

KHANDVI- Gujarat
This delectable snack is made from gram flour and yoghurt, tempered with sesame, mustard seeds and decorated with green chillies, coconut and coriander leaves for its amazing look.

BEBINCA- Goa
Famous for its seafood cuisine, Goa is also known for its authentic and exquisite pudding dessert. The traditional Bebinca in Goa is made up of 16 layers and is rightly served warm with cold ice cream.

DEHRORI- Chhattisgarh
It is a delicious dessert from the state of Chhattisgarh which consists of fried rice dumplings dipped in sugar syrup and garnished with nuts. The dish is usually prepared on Diwali eve to make the celebrations more joyful.

LITTI CHOKHA- Bihar
This crunchy dish from Bihar is prepared with wheat balls stuffed with Pitthi – roasted and spiced gram flour) and Chokha (mashed potatoes). The dish becomes all the more delicious with pure desi ghee on its side.

Why Should We Hire Family Law Practice

Family law can be defined as a practice that is closely concerned with the legal issues that have to do with family relationships like child custody, divorce and adoption. The lawyers who practice in this area usually deal with divorce, child support and so on. There are those that choose to specialize in emancipation, paternity, and adoption or any matters that relate to divorce. Formal requirements have to be reasonable and that is usually determined by the state. This includes things like legal capacity, age and same sex marriages. The state is also responsible for setting out the procedures and the rules that govern divorce as well as other matters related to family law.

Important terms to family lawyers

Emancipation: this is a process of the court whereby a person or a minor is allowed to be self-supporting. This means that he assumes the responsibilities of an adult for his welfare and won’t be under the parents.

Marital property: this is the kind of property that was acquired by a spouse while they were married and that needs to be divided when they divorce.

Alimony: this is the allowance that is given to a spouse for support when they are legally divorced or separated or when they are awaiting either of the two.

Paternity: the descent or origin from father. Establishing paternity means that you are confirming who the biological father of the child is.

Prenuptial agreement: this is an agreement that is usually made between two parties before they get married. Here, future rights to property are given in case death or divorce occurs.

Why hire a family lawyer?

Many of the family lawyers offer their services during divorce proceedings and other matters that may be related to divorce. Family law is a broad practice however, and it includes areas like reproductive rights and foster care. Some of the reasons as to why you may need a family lawyer include:

Divorce: every partner hires a lawmaker who is responsible for the creation of a settlement plan so as not to go top trail. They are usually people who can be able to divide any marital property, proposing child custody scenarios, and also calculating spousal support.

Child support/ child custody: the court orders and agreements on settlement involve support and custody and can be included in divorce cases that are larger. These can be revisited if any conditions change like the financial standing of a parent.

Paternity: sometimes a mother can file such a case as they try to secure some child support payments from the father. Also, a father can file a paternity case so as to be able to have a kind of relationship with a child. DNA testing is used for the determination.

Adoption: foster care and adoption is both complex. The process can differ and usually factors like where a child is from and state laws can affect the process. A family lawyer can be able to handle all these. A foster parent can sometimes adopt a foster child. The entire foster process sometimes doesn’t require any kind of legal representation.

Posted in Law